|
Titeflex
Products -S818XX Teflon® Hose Assembly
APPLICATIONS
- Sizes
1"/1-1/2" chlorine hose for rail car loading and
unloading
- Titeflex
1/2" chlorine hose for replacing copper whips at chlorine
repackaging plants filling 1 ton containers and 100/150
lb. cylinders
S818XX
TEFLON® HOSE ASSEMBLY SPECIFICATIONS
ASSEMBLY
PART NUMBERS FOR ALTERNATIVE END FITTING STYLES
20
Years of Proven Performance
- Over
20 years of safe, reliable performance
- Engineered
specifically to meet the critical application conditions
of chlorine transfer
- Used
worldwide by major chemical producers
- Meets
or exceeds the Chlorine Institute guidelines, Drawing No.
135
Chlorine
transfer is recognized as one of the most challenging and
potentially hazardous hose applications. Aware of the clear
need for safety, reliability and performance, Titeflex has
engineered a unique product to meet the demands of this critical
application. Titeflex S818XX chlorine hoses are internationally
accepted and recognized for providing many years of unparalleled
safety and performance. Please refer to Technical Bulletin
Number 4 for handling and installation instructions.
S818XX
assemblies are more flexible and resilient than metal hose.
The Teflon® innercore is virtually stress-free in continuous
flexing installations. The convolutions of Titeflex chlorine
hose are shallow and helical, rather than annular as in metal
hose, to facilitate draining and cleaning and reduce transfer
time cycles.
Damage
resistance is another advantage; Titeflex chlorine hose recovers
its form and capacity after crushing, while metal hose may
remain permanently flattened.
Titeflex
chlorine transfer hose is currently available in 1/2",
1", and 1-1/2" I.D.'s. It offers full flow characteristics
for faster loading and unloading and are supplied directly
from the Titeflex plant in lengths from one to 50 feet.
For quality
assurance and traceability, each factory-made and tested assembly
is serialized and recorded at Titeflex, along with the installation
location and date. The assembly is also clearly tagged with
its pressure and temperature ratings.
Construction
- Convoluted
Teflon® cone with a double layer of Kynar® braid
- 1"/1-1/2"
sizes are covered with a CPE jacket for abrasion protection.
- Spiral
wrap Teflon® chafe sleeve is used on assemblies less
than 3 feet in length
- Schedule
80 monel male pipe fittings
- Monel
schedule MSS type A stub ends available for 1" size
- 1/2"
size males have a press-fit Kynar liner/insert to prevent
erosion.
Additional
Literature
- Application
Bulletin No. 101 Chlorine/Bromine Transfer Hose
- Application
Bulletin No. 106 Chlorine Repackaging
- Chlorine
Hose Do's and Don'ts
- S81808
Chlorine Hose Attachment Diagram
- Preventative
Maintenance/Field Inspection Guide
NOTE:
Additional Kynar® liner also available
NOTE: Outer Kynar braid on 1/2" chlorine hose is for
abrasion protection only
Home | Markets
Served | Products | New
Products | Library | Contact
|
