Titeflex - Products - Assembly Part Numbers

		Assembly Part Numbers

Titeflex Products - Assembly Part Numbers

APPLICATIONS

F: R115
A: R101
B: R157
J: R154
FA: RF101
PF: RF115
CC: R272
CK: R276
CV: R285
CZ: R287
CT: R267
CN: R270
CW: R273
CF: R283
DU: DC2000
E: R160
D: R122
PA: RP101
PE: RP160
SS: 117092

TEMPERATURE RANGE

00: JIC-Female Swivel
01: JIC-Female Swivel-45° Elbow
02 : JIC-Female Swivel-90° Elbow
03: Male Pipe
04: Male Union
05: Fixed Flange
06: Lap Joint Flange (150# Carbon steel)
07: SAE-Female Swivel-Straight
08: SAE-Female Swivel-45° Elbow
09: SAE-Female Swivel-90° Elbow
10: Female Pipe
15: Two-Bolt Swivel Flange
16: Male Inverted Flare-Straight
17: Male Inverted Flare-45° Elbow
18: Male Inverted Flare-90° Elbow
19: SAE Compression-Male
20: SAE Compression-Female
21: Female Swivel-Straight-Flareless
22: Female Swivel-45° Elbow-Flareless
23: Female Swivel-90° Elbow-Flareless
24: Tube Adapter
25: Butt Weld End
26 : Paint Spray Female
27: Lap Joint Flange (300# carbon steel)
28: Lap Joint Flange (150# SS 304)
29: Lap Joint Flange (300# SS 304)
30: Lap Joint Flange (150# SS 316)
31: Lap Joint Flange (300# SS 316)
32: Sanitary
33 : O-Ring Face Seal

STANDARDS

E: Chafe Sleeve-Heat-Shrinkable Teflon® FEP
P: Chafe Sleeve-Heat Shrinkable Polyolefin
V: Chafe Sleeve-Tubular Vinyl
N: Chafe Sleeve-Tubular Neoprene
L: Hypalon Sleeve
J: Armor Sleeve
F: Fire Sleeve-Tubular TF1072
G: Spring Guard
T: Halar Coating on Flange-Retaining Insert
H: Halar Encapsulating of Flange-Retaining Insert

Most accessories are designated by adding the appropriate suffix to the assembly number, as indicated. Where one of these letter codes is used, it implies that the accessory is to be applied to the entire hose length, if applicable. Certain accessories, however, are often used in short sections for strain relief or chafing protection. They include armor sleeves, heat-shrinkable chafe sleeves and spring guard.

For less than full length sections of such accessories, omit the letter code for that accessory from the assembly number and add written instructions. Indicate the accessory by specific part number, the length required, and the proper position(s) on the assembly.

Accessory Part Numbers

Armor Sleeve- 106479-Size

Heat-Shrinkable Polyolefin Sleeve- 95033-Size

Heat-Shrinkable Teflon® FEP Sleeve- 95423-Size

Spring Guard-Y171 (I.D. Size in 1/16")-1.

Other Considerations

Markings

Ordinarily, Titeflex hose assemblies are not identified, except S818XX Chlorine/

Bromine Transfer Hose which has markings.

Specials

We have full capability for marking assemblies with the hose number or fabrication date, your assembly number, working pressure or other pertinent information. Markings can be electroetched on fittings or on stainless steel tags which are permanently affixed.

Authorized Titeflex Distributors also have various means of creating permanent markings to your order. Other types of markings, such as stamped numbers or color codes, are available upon request; consult Titeflex or your Titeflex Distributor.

Pressure Testing

Titeflex hose assemblies are proof-pressure-

tested at 1 1/2 times the recommended operating pressure or to customer requirements. Test medium is water.

Specials

Many special testing procedures can be utilized, according to your needs, and media can be varied on order. At the Titeflex plant, we can test with cryogenic liquids, for example, or with nitrogen and other gases to specific levels of leak detection. Mass spectrometer equipment allows precise leak measurement.

Packaging

Titeflex hose assemblies are carefully wrapped and packed for shipment, with protection routinely provided for external threads of fittings and for hose lengths, to prevent kinking in transit.

Specials

When required, almost any kind of special packing can be supplied by Titeflex. Typical examples: end caps, crates and other special cartons, individual packaging, special packing materials.

Cleaning

After fabrication, various cleaning procedures are available depending on customer requirements.

Specials

Stringent cleaning procedures, e.g. ultrasonic cleaning, may be ordered to reach specific levels of cleanliness, such as for hose assemblies to be placed in oxygen service.